Lubrication Tactics for Industries Made Simple: 8th Discipline of World Class Maintenance Management (Paperback)
This Book will Help your Industries Reduce the Cost of Lubricants and Lubrication Problems in Industries.
The subject of lubrication is very broad indeed and is evolving continuously with new technologies and developments as time passed. As a result, some of the things that have been written and published are now bygone and obsolete. While most maintenance and lubrication people I know are not educated properly on lubrication. Most of their decision on which lubricant to use and when to change it is based most often on OEM recommendations. The purpose of writing this book is to provide the maintenance people and the lubricant users an easy-to-understand and straightforward approach to lubrication that they can adapt easily in their plant to reduce lubricant related failures and reduce their maintenance costs.
Lubricants can also be said to be the lifeblood of the equipment. The costs of lubricants in the industry only tell us just one side of the story. The much higher cost can be seen in the number of breakdowns and failures encountered daily caused by incorrect practices and myths on lubrication. The costs of failures attributed to lubrication are a minimum of 2 folds the costs of lubricants that are consumed in the equipment. This means that if your industry is a heavy user of lubrication, such as in the mining industry, multiply this by a minimum of two and that would be the estimated cost of failures attributed to lubrication.
Some of the highlights that are covered in this book include the following
- Why There is No Lubrication Engineering Course in College?
- Is it possible to remove contaminants in the oil?
- Extended Oil Drain - Myth or Fact
- Does Oil Really Wear Out?
- Selecting the Correct Lubricating Oil for the Equipment
- Can We Mixed Different Grades and Brands of SAE Engine Oil?
- Grease Incompatibility Issue
- Advantages of Synthetic Oil over Petroleum Oil
- Frequently Asked Questions on Synthetic Oil
- Different Viscosity Grades for Industrial Lubricants
- Does Lubricating Oil Really Wear Out?
- Six Myths About Lubrication
- Ten Strategies to Adapt to Lubrication and Contamination Control
- Why is the Study of Tribology Important to Industries?
- Why Lubrication Failures Repeat Itself
- Benefits of Oil Analysis
- Why Does Oil Analysis Program Fail in Some Industries?
- Tips for Conducting Oil Analysis
- Lubrication Tactics on Lubricating Oil
- Lubrication Tactics on Oil Contamination Control(Code)
- Lubrication Tactics on Greasing
- Steps on Adopting a Lubrication Strategy
Contamination is the main problem with lubrication, and it has always been there in the equipment, and it comes not only in solid form but in liquid and air (bubbles). The author believes that the more contamination present in lubricating oil, then the more chances of failures to happen, not only in hydraulics but in all lubricating systems.
This book explains what these contaminants can do and if it is possible to remove them from the oil. Whether your industry is a large consumer or not of lubricants, there are way too many problems experienced by maintenance people regarding lubrication. To name a few, we have problems with bearing failures, oil leakage, lack of procedure, human errors in mixing lubricants, wrong or obsolete procedures on lubrication, spillages, over lubrication, under lubrication, abrasion, oil contamination, oil oxidation, premature failures, improper storage of new lubricants, grease incompatibility issues, high lubrication costs, guesstimate on greasing interval, lack of knowledge, cost-cutting schemes on lubrication training, and you name it.
Book Clubs - Upcoming Dates
Please check back. We will be announcing the dates and times in the near future.